Maintenance; Hepa Filter - Tineco A10 Série Mode D'emploi

Maintenance

Note:
• Clean the dustbin and filters periodically.
• Use a cleaning tool to thoroughly clean the pre-filter when pink light blinking. To maintain high
performance, wash and dry the pre-filter monthly, replacing it every 6 months.
Wash and dry the HEPA filter every 3 months, replacing it every 12 months.
Mesh filter and Pre-filter
1
Turn counter-clockwise to remove the filters.
3
Clean the pre-filter and mesh filter under
cold, running water. Air dry completely before
reinstalling.

HEPA Filter

Press the HEPA release button and gently
remove for cleaning. Do not use the appliance
without first installing the HEPA filter.
Mesh filter Pre-filter
2
Do not turn the appliance upside down when
removing or installing the filter to prevent dust
from entering the air channel of the motor.
4
②
①
After cleaning, insert the pre-filter into the mesh
filter properly and it clicks into place. Install the
clean filters back into the main body, then close
the dustbin flap.
Do not place the appliance as above when
removing or installing the HEPA filter, to prevent
dust from entering the motor.
10