Electrolux ESL 8720RA Notice D'utilisation page 30

30 www.electrolux.com
German de-
grees (°dH)
11 - 14
4 - 10
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
the setting.
4. Press the on/off button to confirm the
setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser and
no rinse aid will be released.
Factory setting: level 4.
French de-
grees (°fH)
19 - 25
7 - 18
<4 <7
, ,
.
,
continues to
= level 5.
again and again to change
mmol/l
1.9 - 2.5
0.7 - 1.8
<0.7
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
and until
, and
2. Press
, and
3. Press
4. Press the on/off button to confirm the
6.4 Use of rinse aid and multi-
tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
Clarke de- Water softener
grees
13 - 17
5 - 12
< 5
hold simultaneously
the indicators ,
start to flash and the display is blank.
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g. = level 4.
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
again and again to change
the setting.
setting.
level
3
2
2)
1
and until
, , and
, , and
continues to