Electrical Safety; Safety At The Workplace; Personal Safety - Singercon CON.FM-1400 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
EN
TECHNICAL DATA
Parameter
Parameter value
Description
Product name
FOG MACHINE
BUBBLE & FOG
MACHINE
Model
CON.FM-1400
CON.BF-400
Rated voltage
230/50
[V~]/Frequency
[Hz]
Rated power [W]
1400
400
Dimensions [cm]
76x41.5x41.5
53x23x28
Weight [kg]
17.5
7.25
Warm-up time
5
3
[min]
Capacity [l]
2.4
1.1 (mist
generating
liquid )
0.8 (soap
bubbles liquid )
Liquid
55
14 (fog)
45 (soap
consumption
bubbles)
(at maximum
efficiency)
[g/min.]
Remote control
68
36
range [m]
Control method (x – option is available)
Control panel
-
DMX console
x
-
Wireless remote
x
controller
Wired remote
-
x
control
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
8
U S E R M A N U A L
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation.
Attention! Hot surface, risk of burns.
Electric shock warning.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
Whenever „device" or „product" are used in the warnings
and instructions, it shall mean <FOG MACHINE, BUBBLE &
FOG MACHINE>. Do not use in very humid environments
or in the direct vicinity of water tanks. Prevent the device
from getting wet. Risk of electric shock! Do not cover air
inlets/ outlets. When in use, do not put your hands or other
items inside the device!

2.1. ELECTRICAL SAFETY

a)
The plug has to fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to
rain, in direct contact with a wet surface or operating
in a humid environment. Water ingression into the
device increases the risk of damage to the device and
of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
and
e)
Before inspecting the device or adding liquid,
disconnect the device from the power supply. Be
careful when adding smoke liquid so that it doesn't
get into the device.

2.2. SAFETY AT THE WORKPLACE

a)
Make sure the workplace is orderly and well lit.
A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
b)
Do not use the device in an explosion hazard zone,
for example in the presence of flammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
c)
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
If a fire starts, use solely powder or carbon dioxide
(CO
) fire extinguishers suitable for use on live
2
devices to put it out.
g)
Children or unauthorised persons are forbidden from
entering a work station. (A distraction may result in
a loss of control over the device).
h)
Use the device in a well-ventilated space.
i)
Do not point the smoke nozzle at yourself or other
persons or animals. Smoke exiting from the nozzle
can cause burns (keep a safe distance of 0.5 m).
j)
In
case
of
operating
problems,
immediately
disconnect the device from the power supply and
contact the manufacturer's customer service.
k)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
l)
Please keep this manual available for future
reference. If this device is passed on to third parties,
the manual must be passed on with it.
m)
The device must not be operated in a tropical
climate.
n)
Unauthorized persons should not remain near the
device.
o)
If the device is operated at height, no unauthorized
persons should be allowed near the device (risk of
slipping and injury caused by hot smoke liquid and
its residue).
p)
During installation, repairs and/or maintenance, the
area under and around the device must be protected
against unauthorized access.
q)
The device must always be additionally secured, e.g.
with a safety cable. Additional protection must be
constructed in such a way that none of the elements
will fall in case of main protection failure.
r)
The surface on which you want to place the device
must be durable enough so that it can support
device weight without permanent deformation.
s)
Do not use the appliance in the proximity of heat
sources.
REMEMBER! When using the device, protect children
and other bystanders.

2.3. PERSONAL SAFETY

a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
c)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/ or knowledge unless they are supervised by
a person responsible for their safety or they have
received instructions on how to operate the device.
EN
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
e)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
f)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
g)
The device is not a toy. Children should be supervised
so that they will not play with the device.
h)
Danger! Generated smoke and smoke outlet (nozzle)
are very hot. Be careful when using the device.
i)
Do not lean against the appliance. Do not store
anything on the appliance.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use appropriate tools
for the given task. A correctly selected device will
perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and have to be repaired.
c)
Make sure the plug is disconnected from the
socket before attempting any adjustments, tool
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
i)
When transporting and handling the device between
the warehouse and the destination, take into account
the occupational health and safety principles for
manual transport operations which apply in the
country where the device will be used.
j)
Do not touch articulated parts or accessories, unless
the device has been disconnected from a power
source.
k)
It is forbidden to move, adjusting and rotating the
device in the course of work
l)
Do not leave this appliance unattended while it is in
use.
m)
Clean the device regularly to avoid a durable
encrustation of dirt.
n)
Do not cover the air intake and outlet.
o)
Connection to the power supply can only be
performed
by
personnel
with
appropriate
authorisation and qualifications.
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Con.bf-400

Table des Matières