Operation; Using The Control Panel - Muskoka LEGION EST-425T-10 Guide D'utilisation Et D'entretien

Operation

Read All Instructions Before Use
Check that the heater outlet grill is not covered or obstructed in anyway, and make sure the power to the
unit is switched on.
NOTE: When the heat function is used for the first time, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for an extended period of time.

Using the Control Panel

The control panel is located behind the door of the stove.
1. Main Power Switch: The Power
supplies power to all of the functions of
the stove. This switch must be in the ON
position for any functions to work.
2. Flame Effect: Toggle the Power Switch
ON. The Power indicator light will glow.
The flame effect will be visible through the
front glass.
3. Temperature Knob: Toggle the
Temperature
Temperature control knob regulates
the temperature level of the room. The
further the knob is rotated clockwise, the
higher the temperature setting. Turning
the knob counterclockwise will lower the
temperature setting. Use this function to
help regulate the ambient temperature
level.
4. Temperature Limiting Control: This heater
is equipped with a Temperature Limiting
Control. Should the heater reach an
unsafe temperature, the heater will
automatically turn off. To reset: Unplug
the power cord from the outlet. Wait 5
minutes. With the Power switch in the OFF
position, plug the power cord back into
the outlet.
Switch
Switch ON, the
9