Kasanova BRO000003 Manuel D'instruction page 15

HANDHELD STEAM CLEANER
15
(I) (II)
2. Install spray cup with round brush or bent spray cup
For direct installation on short spray nozzle, aim the spray cup with round brush or bent
spray cup at the top of spray nozzle, as shown in Figure 3, and push the spray cup
upwards until it is in position. As the short spray nozzle and spray cup are positioned in
six directions, the angle and direction can be adjusted during the installation. Or, first in-
stall long spray cup and then the spray cup with round brush or bent spray cup. The long
spray cup is installed in the same method as the installation of spray cup with hairbrush.
The spray cup with round brush or bent spray cup and long spray cup can be installed in
the same procedures as the installation on short spray nozzle.
(III)
3. Installation of spray cup for door/window
First install the spray cup with hairbrush on short spray nozzle
As shown in Figure 4 and Figure 5, install the two small hooks of the spray cup for door/
window onto suspension lugs of the spray cup with hairbrush, and then trigger the big
hook of the spray cup for door/window, and push the spray cup for door/window up and
clutch it onto the body of the spray cup with hairbrush.
(IV) (V)