Connection; Important - Velleman VM102 Mode D'emploi

CONNECTION :

Fuse
'AC Power'
connector'
Control connector
(e.g. Push button)
CAUTION ! : You should add a rearmable fuse of max. 10A when the device
is mounted on a DIN-rail in a distribution box.
All connections must be performed using solid-core wire of the appropriate
rating.
Installation must be done according to local regulations and standards.
If any doubt, consult a licensed technician.
This module is not suited for portable applications. The unit must be wall-
mounted or clicked on a DIN-rail.
The remote pushbuttons always carry a dangerous voltage and must be
rated for the applied AC voltage.
The module is operated by inserting a fine tipped object (e.g. Screw-
driver) in the opening. This can be very useful during the test phase of
the installation (see fig.)
MO DULE S
'Mode select'
DIP switch

IMPORTANT !

Connection
Power indicator
Relay status (LD1)
Input status
Internal Push button
Relay connections
(e.g. Lighting)
N C N O C O M
5