Check Menu; Measurement Reset - Lofrans THETIS 5003 Manuel D'installation Et D'utilisation

www.lofrans.com

4.9 Check menu

5 USE
(ON) key to activate controls and to switch on the display lighting. The display lighting switches off 30 seconds
Press the
after the last command given (adjustable default time – see "Light Time").
Press key (UP) to control the anchor ascending
Press key (DOWN) to cast anchor
When any key is released (UP or DOWN) the corresponding action is stopped.

5.1 Measurement reset

Measurement reset can be performed in the Measurement menu by selecting "Yes" in the
Reset Measure row.
Use the (DOWN) or
Software Version
Indicates the version of the software installed.
Operation Time
Indicates the time the instrument operates
Sensor Test
The purpose of this function is to check the state
of the sensor:
Every pulse coming from receiver is momentary
displayed to the screen
LCD Test
This function switches on all the display's pixels
thus making it possible to perform a check on
them.
Exit
To return to the settings menu.
(UP) key to move around the parameters
Select with
Sensor Test
Sensor Test
Confirm with
Select with
Confirm with
Confirm with
V=11.6 Vdc
V=11.6 Vdc
Measure
O f f
R e s e t M e a s u r e
U n i t s
E x i t
UK
N o
F e e t
11