Haussmann PT110942 Guide De L'utilisateur page 26

!
ASSEMBLY
CAUTION! Disconnect battery pack from tool or place the switch in the
locked or off position before making any assembly, adjustments or
changing accessories Such preventive safety measures reduce the risk
of starting the tool accidentally.
INSTALLING AND REMOVING ACCESSORIES
1. To install accessories, align holes in accessory with locating pins on accessory
holder in desired position. Assure that pin in holder are engaged into holes in
accessory and securely tighten with with hex bolt provided (Fig. A).
Your accessories can be engaged into accessory holder 12 positions 30
degrees apart.
For intermediate position an adapter is provided that will allow you to attach the
accessory in any position. Use of adapter will also allow you to use most
competitor accessories.
2. To remove accessory, loosen and remove hex bolt and remove accessory from
holder (Fig. A).
INSTALLING SANDING SHEETS
Your tool uses hook-and-loop backed sandpaper, which firmly grips the backing
pad when applied with moderate pressure.
To change, merely peel off the old sandpaper,remove dust from the backing pad if
necessary, and press the new sandpaper in place.
After considerable use the backing pad surface will become worn, and the backing
pad must be replaced when it no longer offers a firm grip. If you are experiencing
premature wear of the backing pad facing, decrease the amount of pressure you
are applying during operation of the tool.
OPERATION
SLIDE "ON/OFF" SWITCH
The tool is switched "ON" by the slide switch located on the topside of the motor
housing (Fig. A).
Switching on:
TO TURN THE TOOL "ON" slide the switch button forward to the "I" .
Switching off:
TO TURN THE TOOL "OFF" slide the switch button backward the "0" .
WARNING! Hold the tool with both hands while starting the tool, since
torque from the motor can cause the tool to twist.
With the numerous accessories available, your multi-purpose tool is suitable for
various renovation tasks, cleaning or crafts.
Below are some typical uses for your multi-purpose tool.
25