Door Alarm - Sharp SJ-FS810V Mode D'emploi

Door Alarm

• At fi rst, door alarm is set "ON".
• When the refrigerator door is left open, the door alarm will
sound.
• The door alarm will sound in 1 minute after opening the door
and again after 1 minute (once in each case).
• If the door is left open for approx. 3 minutes, the alarm will
sound continuously.
To cancel operation
1
Select the door alarm indication like the below fi gure.
Flashing
2
Select "OFF".
3
Finalize the setting.
At standby display
To start operation
It is the same method as canceling operation.
Select "ON" in step 2.
At standby display
The indication will disappear.
Door alarm indication
It shows Door alarm "ON".
Sound ON/OFF
• At fi rst, the sound is set "ON".
• Use this feature when you want to switch the sound of key
operation and the ending sound of Ice tray cleaning to "ON"
or "OFF".
To set sound "OFF"
Press the key and key simultaneously and continuously
for 3 seconds or more.
To set sound "ON"
Press the key and key simultaneously and continuously
for 3 seconds or more again.
Lighting ON/OFF
• Use this feature when you want to switch the lighting of
control panel and handle indicator when opening the door to
"ON" or "OFF".
To set "OFF"
Press the key and key simultaneously and continuously
for 3 seconds or more.
The display will be turned off.
To set "ON"
Press the key and key simultaneously and continuously
for 3 seconds or more again.
Beep beep beep
It shows the sound "OFF".
Beep beep beep
The indication will disappear.
Beep beep beep
Beep
13