SUOMY MrJump Instructions D'utilisation page 19

Only use original Suomy accessories and spare parts or those specifically indicated by Suomy for the specific model: this is the only way to
assure reliability, safety and compatibility with the helmet used.
The use of non original components and/or accessories makes the warranty void (see warranty conditions on page 23) and can affect
the safety requirements.
MAINTENANCE
To clean the shell and front part use water and mild soap; let the helmet dry at room temperature, never expose it to heat.
Cleaning the helmet with solvents, petrol by-products or chemical substances, the application of stickers or paint could affect the structure of
the shell, thus affecting the safety features, even if the damage is not readily visible.
Do not paint, or apply stickers, petrol or other chemical solvents to this helmet.
To clean the internal lining, just hand wash at 30°C maximum, exclusively using mild soap.
To clean the removable internal lining use a damp cloth and mild soap.
The fabric lining, even if it is part of removable elements, must not be soaked in water when it is applied to or paired with an internal
padding, either rigid or soft.
Dry the pieces at room temperature, away from sunlight and without exposing them to heat.
Periodically clean the «D-Ring» retention system with warm water and mild soap. Do not use solvents or chemical detergents and do not
lubricate.
Some colourings of the shell are made with Fluo paints that could be subject to the natural migration phenomenon with a drop in intensity. The
phenomenon could be enhanced when the helmet is exposed for long periods to a particularly intense light. However, this does not affect the
performances and the quality of MR. JUMP.
Suomy therefore, cannot be held responsible if this should occur.
MAINTENANCE
ENG
17