Triton DCA 100 Instructions D'utilisation page 5

Planing Cuts
When making planing rip cuts on the Saw Table, (using
the side of the blade), you will find that a lot of dust
escapes.
For frequent planing cuts, we recommend you make up
the baffle shown to help contain the dust. For occasional
planing cuts, tape some stiff cardboard to the side
of the guard, and bend it in at the front, to achieve a
similar result.
For optimum performance, make sure that the baffle is
sitting down on the table and that the guard is adjusted as
low as possible.
WARNING
Ensure the saw sleeve remains correctly fitted to the
saw motor, and check it periodically, especially after saw
blade height adjustments.
WARRANTY
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not be made available to any third party.
PURCHASE RECORD
Date of Purchase: ___ / ___ / ____
Model: DCA100
Serial Number: __________________
Retain your receipt as proof of purchase
Do not risk overloading your fuses, extension cord and
saw table switch by connecting the tool and vacuum
cleaner to the same power circuit for simultaneous
switching. The combined startup amperage is excessive
and could result in fusion and possibly fire. Switch the
appliances on separately.
OPTIONAL TRITON DUST COLLECTOR (DCA300)
Domestic vacuum cleaners (bag-type) fill up very quickly,
and the finer dust particles might damage your vacuum
cleaner motor if they leak through the bag. Use the 20
litre Dust Collector between your vacuum cleaner and
Saw Table overhead guard. There are two switchable
inlets and a permanent washable filter inside the lid. Two
hoses and adaptors are included.
The Triton Dust Collector also suits the Triton Series 2000
Workcentre, Router Table, Biscuit Joiner, and other power
tools with a dust collection point.
Triton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to
be defective due to faulty materials or workmanship
within 12 MONTHS from the date of original
purchase, Triton will repair, or at its discretion
replace, the faulty part free of charge.
This guarantee does not apply to commercial use
nor does it extend to normal wear and tear or
damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
Operation / Warranty
GB
5