BH HI POWER SK LINE G930 Instructions De Montage Et Utilisation page 51

Setting Description
1) Metric
Change speed unit from km/h to mph
2) Wheelsize Change rpm – distance travelled ratio
Define the language in which messages are displayed on the monitor.
3) Language
Options: Spanish, Portuguese, English, French, German, Dutch, Italian.
Define the method of operating the machine, between self-powered or connected to
the mains supply. If the ON mode is selected, the machine has to be plugged into the
mains supply. To switch off the monitor in ON mode, hold the STOP key down for 4
seconds.
4) Power
Options: - OFF (Battery operated)
IMPORTANT: With the ON option the machine has to be plugged into the mains
supply otherwise the batteries will run down and may be rendered useless.
Establishes the calculation rate for the steady watt rate program.
5) SWR time This option is only available on models that include the steady watt rate program.
Options: Value in seconds (minimum 20, maximum 60)
Establishes the calculation rate for the steady pulse rate program.
6) SPR time
Options: Value in seconds (minimum 20, maximum 60)
Establishes a maximum time limit for the exercise.
Options: - 0 (No maximum time limit established)
7) Manual T
Options: - OFF (The welcome message is displayed by default)
8) Text
For personalising the welcome message, including, for example, the name of the
gymnasium.
Enables or disables sound messages emitted by the monitor.
Options: - ON
9) Sounds
ELEMENTS OF THE ELECTRONIC MONITOR (Fig.1).-
The electronic monitor is made up of two distinct areas:
The top area, Fig.2 (A – B – C ) for the DISPLAY.
The bottom area, Fig.3 (E – F – G ) for the KEYPAD.
DISPLAY.-
This area comprises of two screens.
(A) The top LED array, which displays real-time exertion levels being produced during the selected
program.
(B) Bottom alphanumeric screen, which guides the user selection options and exercise.
The top screen (A) displays the various pre-programmed exercise profiles (programs) that we can select
and, during exercise, current exertion levels.
The bottom alphanumeric screen (B) is used to guide the user when selecting the exercise to do, as well as
displaying information about the exercise both during and after the session. The LED indicators (C) located
below the alphanumeric screen give a simultaneous readout of SPEED / R.P.M; TIME / DISTANCE;
CALORIES / WATTS; PULSE RATE and indicate which information is being displayed throughout the
exercise.
PERSONALISED SETTINGS PANEL
- ON (Mains operated).
Exercise time limit values in minutes (maximum 60)
- ON (Allows the welcome message to be edited)
(Enabled)
- OFF (Disabled)
16
SK
LINE
sportkoncept