Abicor Binzel eBOX MFS-V3 Mode D'emploi page 24

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment (PPE)
2.4 Classification of the warnings
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.1.1 Removing the transport protection
4.2 Storage
5 Functional description
6 Commissioning
6.1 Installation
eBOX US1 power supply for the bus module
6.2
and logic circuit
6.2.1 Internal power supply
6.2.2 External power supply
EN - 2
EN-3 6.3 Establishing connections
EN-3 6.3.1 eBOX & M-Drive standard / MasterLiner EN-11
6.3.2 eBOX & MF1
EN-3 6.3.3 eBOX & MF1 & MF1-Rear
EN-3 6.4 Power supply
EN-3 6.5 Pin assignment
EN-3
EN-4 7 Operation
EN-4 7.1 Control elements
EN-4 8 Decommissioning
EN-5
EN-5 9 Maintenance and cleaning
EN-6 9.1 Maintenance intervals
EN-6
10 Troubleshooting
EN-7 10.1 Reading the error memory
EN-7
EN-8 11 Disassembly
EN-8
12 Disposal
EN-8 12.1 Materials
12.2 Consumables
EN-8 12.3 Packaging
EN-9
13 Options
EN-9 13.1 Manual terminal for the MF-Control
EN-9
EN-10
eBOX
EN-11
EN-12
EN-13
EN-14
EN-15
EN-18
EN-18
EN-19
EN-19
EN-20
EN-21
EN-21
EN-22
EN-22
EN-22
EN-22
EN-22
EN-23
EN-23
BAL.0388.0 • 2018-08-08