Honda Power Products WB20XT Guide De L'utilisateur page 25

1. Changing oil
Drain the oil while the engine is still warm to assure rapid and
complete draining.
1. Remove the oil filler cap/dipstick and the drain plug, then drain the
oil.
2. Install the drain plug securely using a new sealing washer.
3. Refill with the recommended oil (see page 10) to the specified level.
OIL CAPACITY: WB20XT: 0.56 L (0.59 US qt, 0.49 lmp qt)
WB30XT: 0.58 L (0.61 US qt, 0.51 lmp qt)
OIL LEVEL
SEALING WASHER
DRAIN PLUG
OIL FILLER CAP/DIPSTICK
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.
22