RIDGID RT14000 Mode D'emploi page 11

ASSEMBLY
2. To Remove Hose: Rotate the end of
the Professional Locking Hose in either
direction to release the Hose Latch
from the Inlet Ridges. Press the Hose
Release Button and pull the Hose end
straight out of the Vac Inlet.
REMOVE
HOSE
Inlet
Ridges
Hose
Release
Button
1
1
2
11
Locking Accessories
1. To Connect
RIDGID Wet/Dry Vac includes Locking
Accessories to prevent the Accessories
from falling off when in use. To
connect the Accessories, align the
Nozzle Ridges of the Accessory with
the Release Button of your Extension
Wand. Press to secure the Nozzle to
the Extension Wand.
CONNECT:
Accessory Nozzle
Ridges
2. To Disconnect Accessory: Twist
the Nozzle and Extension Wand to
disengage the Nozzle Ridges and pull.
You may also press the Release Button
and pull to disengage.
DISCONNECT:
Accessory Nozzle
Ridges
Accessory: Your
Extension Wand
Release Button
Extension Wand
Release Button