Rotary Commander Rm-X4S - Sony CDX-M60UI Mode D'emploi

RM-X60M
VOLUME
+/–
SOURCE
MUTING
(ATT)
OFF
RM-X11M
VOL +/–
OFF
GP/ALBM
–/+
The following controls on the marine remote
commander require a different operation from
the unit.
• VOLUME (VOL) +/– button(s)
The same as the control dial on the unit.
• GP/ALBM –/+ button(s)
The same as (1)/(2) (ALBUM –/+) on the
unit.
• MUTING button
To attenuate the sound. (The same as (ATT) on
the card remote commander.)

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SE L
M O D E
D SP L
MODE
SEEK –/+
GP/ALBM
–/+
MODE
SEEK –/+
SOURCE
D S P L
M O D E
S E L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SEL
PRESET/
DISC
SOURCE
VOL
SEEK/AMS
The following controls on the rotary commander
require a different operation from the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• PRESET/DISC control
CD/USB: The same as (1)/(2) (ALBUM –/+)
on the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate).
• VOL (volume) control
The same as the control dial on the unit (rotate).
• SEEK/AMS control
The same as (SEEK) +/– on the unit (rotate, or
rotate and hold).
• DSPL (display) button
To change display items.
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold (SEL).
ATT
MODE
DSPL
OFF
To decrease
19