Cleaning Modes - shark Rocket ZS350 Série Guide De L'utilisateur

(Click)
1. Insert Wand into Zero-M® Cleaner Head.
2. Insert Handheld Vacuum into wand.
Ensure all connections click securely into place.
OFF
Slide switch to the bottom Bare Floor/Small Area Rugs
to turn off power. To begin The brushroll spins slowly to
vacuuming, slide switch to clean bare floors and delicate
the appropriate setting. area rugs.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
SETTINGS
SETTING I SETTING II
Carpet
The brushroll spins faster
to pick up debris below
the surface of your carpet.
2
UPRIGHT
To clean floors, place foot on cleaner
head and tilt handheld vacuum back.
ABOVE-FLOOR HANDHELD
Press the WAND RELEASE button and lift the
handheld vacuum off the wand. Great for cleaning
stairs and furniture.
NOTE: All accessories attach to either the wand or the handheld vacuum.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green
The brushroll is on and working as it should.
Solid Red
There is a jam in the brushroll area. Turn your vacuum off and remove the blockage.
No Light: The vacuum is off.
Flashing Red: The vacuum has overheated. See Troubleshooting section.

CLEANING MODES

ABOVE-FLOOR WITH WAND
Stand the vacuum upright. Step on the foot pedal
on the bottom left side of the cleaner head and pull
the wand up to disconnect it. Great for cleaning
baseboards, ceiling fans, window sills, etc.
s h a r kc l e a n . c o m