Installation And Connection; The Control Panel; Rotary Selector - Bosch HMT84G421 Notice D'utilisation

Installation and connection

This appliance is intended for domestic use only.
Place the tabletop appliance on a firm, level surface (at least
85 cm above the floor). The ventilation slots at the rear, top and
bottom of the appliance must not be obstructed. The minimum
height of the free space above the surface of the appliance is
30 cm.

The control panel

Here, you will see an overview of the control panel. Depending
on the appliance model, there may be differences in the
particular details.

Rotary selector

The rotary selector is used to alter the default values and set
The appliance is fitted with a plug and must only be connected
to a properly-installed earthed socket. The fuse protection must
be rated at 10 amperes (L or B circuit breakers). The mains
voltage must correspond to the voltage specified on the rating
plate.
The socket must be installed and the power cable replaced by
a qualified electrician only. The appliance plug must always be
accessible.
Do not use multiple plugs, power strips or extension leads.
Overloading results in a risk of fire.
values.
The rotary selector is retractable. Press on the rotary selector to
lock it in or out.
5