Last Mic On; Pan / Balance - Harman AKG DMM 4/2/4 Stereo Mode D'emploi

NOTE
NOTE
DMM 4/2/4 Stereo

LAST MIC ON

In LAST MIC ON mode you can set whether the most recently active microphone channel
remains open.
The function is set by turning the "OUT MASTER" rotary control. Turning the control clockwise
switches the function on, and the LED ring lights up completely. Turning the control counter-
clockwise switches the function off, and only one LED lights up.
Figure 19: LED ring when switching a function off/on
Pressing the rotary control also switches the function on or off.

PAN / BALANCE

In PAN / BALANCE mode the balance or panorama assignment (PAN) of the following channels
is adjusted:
• all MIC/LINE input channels (PAN function)
• all AUX input channels (PAN function)
• Main output (BALANCE function)
Balance means assignment of a main signal to the output.
Changes to the channels just cause attenuation!
If no further output is required from the left stereo channel of an output, turn the balance
controller to the right.
In mono inputs, the signal is assigned equally to stereo left and right as standard. If the input
is to be assigned to the left only, turn the rotary knob for the input to the left when the PAN
function is active.
The control option is sufficient when turning clockwise from 0 dB to - ∞ dB, increment: 2 dB.
Figure 20: Increments on the circular LED display for the BALANCE function
For linear adjustment, only the top middle LED lights up. This LED (0 db) is also the starting
point for clockwise or anti-clockwise rotation.
Operation
www.audiovias.com
47