Tab. 1 :
Classification key
EN
26
Classification key
DIN EN 1125
The properties of locks are described by the ten-digit classification key according
to DIN EN 1125.
The classification key for this lock is:
3
6
7
B
1
3
Tab. 1 explains the classification key.
Project lock
Meaning
3
High usage frequency in situations when there is little incen-
tive to be careful, thus posing the possibility of accidents or
misuse.
6
100,000 test cycles
7
Door mass greater than 200 kg (300 kg)
B
Suitable for use on fire and smoke protection doors on the
basis of testing in accordance with EN 1634-1
1
Suitable for critical security function
3
High corrosion resistance in accordance with EN 1670:2007
Section 5.6
2
See DIN EN 179, because this standard specifies stricter intru-
sion protection requirements
2
Approved with the following handle bars/pushbars:
· effeff 8000 – projection of up to 100 mm (normal
A/B
Panic door lock with
· A
· handle bar actuation
· B
· push bar actuation
C
for double-leaf doors: only in the inactive leaf
A
2
2
C
B
projection)
Notes