Basic Operation - Sharp AH-XP18UHD Mode D'emploi

BASIC OPERATION

NOTE:
AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to the
room temperature when the unit is turned on.
DRY MODE
The fan speed is preset to AUTO and cannot be changed.
WHEN POWER FAILURE OCCURES
This air conditioner has a memory function to store setting when a power failure occurs.
After power recovery, the unit will automatically re-start in the same settings which were active before
the power failure, except for TIMER, SUPER JET, BEST SLEEP, BABY MODE, ECO MODE,SELF
CLEAN*, LOCK ON SENSOR* settings.
* High end models only
AH-XP18SHV-1 (A889)_EN.indd EN-5 AH-XP18SHV-1 (A889)_EN.indd EN-5
1
Press the MODE button to select the
operation mode.
2
Press the ON/OFF button to start
operation.
• The Green OPERATION lamp (
TO TURN OFF
2
Press the ON/OFF button again.
• The Green OPERATION lamp (
1
3
Press the THERMOSTAT button to
3
set the desired temperature, you can
set temperature in 0.5 °C increments.
4
(AUTO/DRY mode)
The temperature can be
changed up to ±2.0°C
from the automatic set-
ting.
(COOL mode)
The temperature setting
range: 16.0-30.0°C.
4
Press the FAN button to set the de-
sired fan speed.
AUTO QUIET SOFT
EN-5
) will light up.
) will turn off.
LOW HIGH
11/8/2559 BE 2:36 PM 11/8/2559 BE 2:36 PM