Center Differential - Horizon Hobby Losi LMT SOLID AXLE 4WD MONSTER TRUCK RTR GRAVE DIGGER Manuel D'utilisation

CENTER DIFFERENTIAL

1. To remove the center differential from the vehicle, remove the two screws in the center
cover to expose the center differential.
2. Remove the four screws holding the diff support blocks, and remove the diff support
blocks.
3. Remove the two screwpins holding the front and rear drivelines, and remove the center
halves of the driveline. This will provide enough clearance to remove the differential out
of the bottom of the vehicle.
4. Check the ring and pinion as well as the bevel gears in the differential. Replace as
needed. If fluid is leaking, replace the outdrive o-rings and ring gear gasket. Be sure to
grease the outdrives prior to sliding them through the o-rings.. Apply more grease to the
ring and pinion (LOSA99209).
5. Check the differential fluid and refill or replace as needed with TLR75009 (500k) fluid.
The fluid level should be about 0.12 in (3.0mm) from the
top surface of the case. Do not overfill or the differential unit might leak.
LOS246005
LOSA6940
LOS242040
LOSA6948
LOS242039
LOS242047
LOS242046
LMT SOLID AXLE 4WD MONSTER TRUCK • RTR: INSTRUCTION MANUAL
LOS242032
LOS242032
LOS242043
TLR5964
LOS242036
TLR5934
TLR5963
TLR5905
LOS242047
LOS242037
TLR5964
LOS242032
TLR5963
Center Differential Fluid : 500,000
LOS242046
LOS242039
LOSA6948
LOS242035
FR
47