Cleaning And Maintenance; Troubleshooting - Imetec M7801 Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING! Risk of damage to the appliance. DO NOT insert
cheese rinds.
EN
WARNING! Risk of food contamination. DO NOT place the
bowl in the microwave oven.
WARNING! DO NOT exceed the maximum level indicated on
the bowl.
• Place the container on a flat surface.
• Insert the blades on the pin in the container [Fig B].
• Place the food inside the container.
• Place the cover over the container [Fig. C].
• Fit the motor unit into the fixture on the lid [Fig. D].
• Unwind the power cable completely.
• Press on the motor unit to actuate the appliance [Fig. E].
• When the food has been processed, wait for the blades to come to a complete stop.
• Disconnect the power cable plug from the power socket.
• Lift the motor casing.
• Remove the lid.
• Remove the blades.
• Empty the container.
WARNING! Always disconnect the appliance from the socket
before cleaning or performing maintenance.
• Clean the accessories according to the instructions in the "Cleaning before first use" chapter.
• Clean the motor unit with a damp cloth that has been well wrung out.
• Dry well.
Should one of the problems indicated occur, adopt the proposed solution:
Problems
The food is not chopped evenly
The parsley has not been chopped
properly
14

CLEANING AND MAINTENANCE

TROUBLESHOOTING

Use the pulse mode and not continuous mode.
Wait for the blades to stop completely. Remove the motor unit
and the cover and mix the ingredients with a spatula. Close
once again and continue processing in pulse mode.
The container has been filled with too many ingredients;
remove the excess ingredients and continue processing.
Solutions
Repeat the operation using dry parsley.

Publicité

Table des Matières
loading

Table des Matières