Bosch GOP Professional 30-28 Notice Originale page 12

12 | English
Application tool
saw blade for wood
and metal
ACZ 85 RD4
Starlock
85 mm diameter
Diamond-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
AVZ 70 RT4
Starlock
70 mm wide
carbide-RIFF mor-
tar remover
MATI 68 RD4
StarlockMax
68 × 30 mm dia-
mond-RIFF plunge
cut saw blade for
mortar and abras-
ive material
AVZ 90 RT2
Starlock
90 mm wide
carbide-RIFF delta
plate for mortar
and abrasive ma-
terials
AVZ 93 G
Starlock
93 mm-wide sand-
ing plate for sand-
ing sheets of the
Delta 93 mm series
AVZ 32 RT4
Starlock
32 × 50 mm
carbide-RIFF sand-
ing finger for wood
and paint
ASZ 32 SC
Starlock
24 mm-wide HCS
pull cutting edge,
11 mm-wide HCS
push cutting edge
ATZ 52 SC
Starlock
52 mm scraper, ri-
gid
1 609 92A 5NT | (22.06.2020)
Material Application
Example: Sawing shadow joints, sawing off wooden beams
for supports, cutting pipes to size, cutting through non-
hardened nails and bolts when flush with the surface
Cement joints, soft wall Cutting and separating in areas and corners that are close
tiles, fibreglass-reinforced to the edge or difficult to access, extra long service life
plastics, epoxy, GKF thanks to Diamond-RIFF;
Example: Removing joints between wall tiles for repair
work, recesses in tiles;
also available as Carbide-RIFF version: ACZ 85 RT3 for
normal joints, ACZ 70 RT5 for thin joints
Mortar, joints, epoxy Reaming and separating joint and tile material, as well as
resin, fibreglass-rein- rasping and sanding on a hard substrate; long service life
forced plastics, abrasive thanks to BOSCH carbide technology;
materials Example: Removing tile adhesive and grout
Grout, abrasive material, Cutting and separating in areas and corners that are close
aerated concrete, soft to the edge or difficult to access thanks to the sharp ends,
bricks, wall tiles, cement extra long service life thanks to diamond-RIFF;
fibreboards, composite Example: Removing tile joints in areas that are close to the
materials edge, such as in corners or fittings, cutting recesses in
hard, abrasive materials such as cement fibreboards and
fibreglass-reinforced composite materials;
also available as MATI 68 RSD4 for thin joints
Mortar, concrete residue, Rasping and sanding on a hard substrate;
wood, abrasive materials, Example: Removing mortar or tile adhesive (e.g. when re-
paint placing damaged tiles), removing carpet adhesive
residues, removing paint residues;
available in grain sizes 20 (RT2), 40 (RT4), 60 (RT6) or
100 (RT10)
Depends on the sanding Sanding on edges, in corners or in difficult-to-access
sheet areas;
depending on sanding sheet, e.g. for sanding wood, paint,
lacquer, stone;
non-woven materials for cleaning and for structuring
wood, removing rust from metal and for abrading lac-
quers, polishing felt for pre-polishing
Wood, paint Sanding wood or paint in difficult-to-access places without
sanding paper; long service life thanks to BOSCH carbide
technology;
Example: Sanding down paint between window shutter
slats, sanding wooden flooring in corners;
available in grain sizes 40 (RT4) and 100 (RT10)
Roofing felt, carpets, arti- Quick and precise cutting of soft material and flexible, ab-
ficial turf, cardboard, PVC rasive materials;
flooring Example: Cutting carpets, cardboard, PVC flooring, re-
cesses in roofing felt
Carpets, mortar, con- Scraping on a hard substrate;
crete, tile adhesive Example: Removing mortar, tile adhesive and concrete
and carpet adhesive residues;
available as flexible scraper ATZ 52 SFC (soft carpet ad-
hesive/paint residues)
Bosch Power Tools