Normal Maintenance; Technical Data; Dimensions - Stiebel Eltron MEGABOOST Utilisation Et Installation

INSTALLATION

NORMAL MAINTENANCE

is encountered. When the safety cutout has tripped, it must be reset
manually.
To reset the safety cutout, use the following procedure:
Turn off the circuit breaker attached to the water heater
Remove the front cover of the water heater
Identify the safety thermal cutout on the top of the copper
heating canister. The button at the top is the reset button.
Press down on the button, take note of whether it clicks or not
when pressed.
13. Normal maintenance
STIEBEL ELTRON tankless water heaters are designed for a very long
service life. Actual life expectancy will vary with water quality and
use. The appliance itself does not require any regular maintenance.
However, to ensure consistent water flow, it is recommended to
periodically remove scale and dirt that may build up at the aerator of
the faucet(s), the filter screen in the appliance, or in the shower head.
WWW.STIEBEL-ELTRON-USA.COM

14. Technical data

14.1 Dimensions

b01
c06 c06 c01 c01
4˝(10 cm)
7¾˝(20 cm)
b01 Electrical cable entry
c01 cold water inlet
c06 hot water outlet
1½˝(3.8 cm)
4¼˝(11 cm)
½˝ NPT
½˝ NPT
MEGABOOST | 9