Table des Matières
Publicité
Manuel utilisateur du module de contrôle multifonction de barrière immatérielle
The undersigned, representing the manufacturer
Rockwell Automation, Inc.
2 Executive Dr.
Chelmsford, MA 01824
USA
Herewith declare that the Products:
Product identification (brand and
catalogue number/part number):
Product Safety Function
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with
the installation instructions contained in the product documentation:
2006/42/EC
2004/108/EC
and that the standards and/or technical specifications referenced below have been applied:
EN 61496-1:2004 + A1:2008
IEC 61496-2:2006
EN ISO 13849-1:2008
EN 61508 Parts 1-7:1998-2000
EN 954-1:1997
EN 50178:1997
EN 62061:2005
EN 60204-1:2006
EN 61000-6-4:2007
EN 61000-6-2:2005
Manufacturer:
Signature
Name:
Daniel L. Nachtigall
Position:
Supv – Product Certification Engineering
Date:
01-Mar-2011
Document Control Number: SEN-0394-B-EN
16
EC Declaration of Conformity
and the authorised representative established within the
Community
Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
MSR4x Safety Base / MSR4xE Expander Controller Modules
Allen-Bradley 440R-P and 445L-1 Series
(reference the attached list of catalogue numbers)
The MSR4x safety base control devices and the MSR4xE extension modules
can be used in applications up to Safety Category 4 (EN 954-1)/ SIL3/SIL
CL3 (EN 61508 / EN 62061) and PL e (EN ISO 13849-1).
Machinery Directive
EMC Directive
Safety of machinery – Electro-sensitive protective equipment – Part 1: General
requirements and tests
Safety of machinery – Electro-sensitive protective equipment – Part 2:
Particular requirements for equipment using active opto-electronic protective
devices (AOPD's)
Safety of machinery – Safety-related parts of control systems – Part 1: General
principles for design
Functional safety of electrical/electronic/programmable electronic safety-
related systems
Safety of machinery – Safety related parts of control systems – Part 1: General
principles for design
Electronic equipment for use in power installations
Safety of machinery – Functional safety of safety-related electrical, electronic
and programmable electronic control systems
Safety of machinery – Electrical equipment of machines – General
requirements
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards –
Emission standard for industrial environments (Class A)
Electromagnetic Compatibility (EMC) – Part 6-2: Generic standards –
Immunity for industrial environments
Authorised Representative in the Community:
Signature
Name:
Position:
Date:
Instructions originales
Viktor Schiffer
Engineering Manager
08-Mar-2011
1 / 2
Publicité
Table des Matières
