Wiko WiSHAKE Guide Utilisateur page 5

please press the multifunction button. Once the earphones
are fully charged, the earphones' LED will turn white.
To ensure that you don't run out of battery, please charge
your WiSHAKE TW when you hear a warning tone every
30 seconds.
2. Pairing left and right earbuds
Note: As the earphones need to be paired together prior to
linking with other devices, please ensure that all Bluetooth
devices around you are turned off to avoid any interference.
• Turn on the earphones at the same time
• The earphones will pair automatically and you will hear
a short high tone in each earphone to indicate the pairing
was successful and lights flash white once per second. The
earphones can now be paired with the Bluetooth device.
3. Pairing with a bluetooth source
Once your earphones are paired with each other, please
follow the following steps to pair with your Bluetooth device:
a. Turn on your Bluetooth on your smartphone or other
devices.
b. Refresh the Bluetooth list.
c. You will see "WiSHAKE TW" appear on the list.
d. Please select "WiSHAKE TW" and wait for confirmation.
e. If the pairing was successful, you should hear two-note
rising scale in the left earbud. The earphones' LED will flash
white every 5 seconds.
If the pairing process was unsuccessful, please repeat
actions a through e of step 3: "Pairing with the Bluetooth
source".
Music functions
WiSHAKE TW earphones have different functions preset
in each earbud.
• Play/pause
Press the multifunction button in the left earbud to play
music and once again to stop music.
• Next song
While music is playing, press the left multifunctional
button twice.
• Previous song
While music is playing, hold the left multifunctional button
to play previous song.
• Google Now