Usage Information - Linea 2000 Domo DO930SBS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
· By selecting this function, the freezer temperature is lowered to -24°C for a maximum of
26 hours. The fridge temperature is set at 2°C for 2 1/2 hours. This function is switched off
automatically after the time has elapsed. The previously set temperature will once again be
maintained.
· If the temperature of the freezer goes below -24°C before the 26 hours have elapsed, the
setting will automatically be switched off.
· This function can be turned on and off with the "MODE" button (functions). Both the
QUICK FRZ symbol (quick freeze) and the QUICK REF (quick cool) symbol will be displayed.
Quick cool
· Select this function if the standard temperature does not cool sufficiently. For example:
with extremely hot weather, if the fridge door is opened often, with a high environmental
temperature, if a large quantity of uncooled food is placed in the fridge, etc.
· By selecting this function, the fridge temperature is set at 2°C for a period of 2 1/2 hours.
This function is switched off automatically after the time has elapsed. The previously set
temperature will once again be maintained.
· This function can be turned on and off with the "MODE" button (functions). The QUICK

Usage Information

REF symbol (quick cool) will be displayed.
Shelving and rack adjustment
CHILD SAFETY LOCK
The child safety lock automatically blocks the buttons for safety. The display will show a
Important note: all food and drink should be removed from all shelves
closed lock. Press the "UNLOCK" button (child safety lock) for 3 seconds to unblock the panel.
and racks before adjusting or removing them
The lock will change on the display.
You can adjust the shelving in the fridge compartment to your required
configuration. To remove a shelf, lift it up slightly so the plastic stabilisers
that on either side of the shelf are above the shelf rails and then pull it
MOVING THE SHELVES AND DOOR RACK
towards you.
· Empty the fridge before moving the shelves or the door racks.
· To move a shelf, raise it and pull it towards you.
You can adjust the racks in the fridge and freezer compartments to your
required configuration. To remove a rack hold both sides of the rack, lift
· To move a door rack, grip it firmly with 2 hands. Raise the door rack and pull it towards you.
it upwards (1) and then pull it towards you (2).
50
DO930SBS
Usage Information
Shelving and rack adjustment
Important note: all food and drink should be removed from all shelves
and racks before adjusting or removing them
You can adjust the shelving in the fridge compartment to your required
configuration. To remove a shelf, lift it up slightly so the plastic stabilisers
that on either side of the shelf are above the shelf rails and then pull it
towards you.
You can adjust the racks in the fridge and freezer compartments to your
required configuration. To remove a rack hold both sides of the rack, lift
it upwards (1) and then pull it towards you (2).
1
1
2
2

Publicité

Table des Matières
loading

Table des Matières