Publicité
Les langues disponibles
Les langues disponibles
The MPT pressure sensors are designed for continuous monitoring of oil, gas,
water, hydraulic and other pressure media in mobile equipment, industrial
hydraulics, compressors and process control equipment.
Economical price and rugged design allows the MPT transducers to be
designed into O.E.M. machinery to give control and condition monitoring
information. The compact construction makes it ideal for installing where space
is at a premium.
Combined with one of the wide range of Webtec digital readouts both
continuous and peak pressures can be measured.
The MPT series utilises thin film techniques along with fully automated
production methods to produce a standard of performance previously only
associated with high price pressure transducers.
Functional specification
Operating temperature: Ambient 5 to 40°C (41 to 104°F)
Fluid temperature: -20 to 100°C (-4 to 212°F) compensated range
Temperature effects: ± 2% full scale typical
Accuracy: ± 0.25% Full scale
Proof pressure: Minimum 2 times full scale
Weight: 53g (0.1 lbs)
Electrical specification
Supply voltage (VS): 10 - 30 VDC all models
Current output: 4 - 20 mA, 2 wire loop, max loop resistance = (VS-7.5) x 50 ohms
Voltage output: 0 - 5 VDC, current consumption = 8mA
Connection type: M12 x 1
Construction material
Body: 17-4PH stainless steel (wetted parts)
Installation guidance
All connections should be made by suitably qualified personnel.
The relevant country specific safety regulations must be observed.
Connection Details
5V
3
4
1
2
Pins
1: V IN
2: V OUT
3: GND
4: N/C
Connecting cable (5m)
Extension cable (5m)
Connector (M12x1)
Introduction
4 - 20 mA
3
4
1
2
Pins
1: Loop +
2: N/C
3: Loop
4: N/C
FT10228-05
FT10229-05
FT9880
1
Publicité
