Pocket Transmitter for
Audio Transmissions
These instructions are intended for users without
any specific technical knowledge Please read
the instructions carefully before operation and
keep them for later reference
Contents
1
2
Applications
2 1 Conformity and approval
3
Operation
3 1 Power supply
4
Overview of groups and channels
1 Important Notes
The unit corresponds to all relevant directives of
the EU and is therefore marked with
•
The unit is suitable for indoor use only Pro-
tect it against dripping water, splash water
and high air humidity The admissible ambient
temperature range is 0 - 40 °C
•
For cleaning only use a dry, soft cloth; never
use chemicals or water
•
No guarantee claims for the unit and no li-
ability for any resulting personal damage or
material damage will be accepted if the unit
is used for other purposes than originally in-
tended, if it is not correctly connected or op-
erated or if it is not repaired in an expert way
If the unit is to be put out of operation
definitely, dispose of the unit in accord-
ance with local regulations
2 Applications
Combined with the receiver RU-901G3 / 5, the
pocket transmitter RU-G3TB / 5 creates a wireless
audio system The REMOSET function is a most
convenient feature for operating the system:
Simply press a button to transfer the settings of
the receiver to the transmitter via an ultrasonic
signal
11
2.1 Conformity and approval
11
Herewith, MONACOR INTERNATIONAL declare
11
that the product RU-G3TB / 5 complies with the
directive 2014 / 53 / EU The EU declaration of
11
conformity is available on the Internet:
11
www jts-europe com
12
Restrictions or requirements apply in the
following countries:
CZ
12
IT
12
The regulations of the country where the prod-
13
uct is operated must always be observed Prior
14
to operating the product, please contact the
14
MONACOR subsidiary or the corresponding
15
authorities of the respective country Links to
the national authorities can be found via the
following Internet address:
www cept org
t ECC
t Topics
t Other spectrum topics: SRD Regulations
and indicative list of equipment sub-classes
t EFIS and National Frequency Tables
3 Operation
For power supply, two 1 5 V batteries of size
AA are required When the symbol
display flashes and the switch MUTE (8) lights up
in red, the batteries are discharged and should
be replaced
•
Only insert batteries of the same type and
always replace both of them
•
If the unit is not in use for a longer period
of time, always remove the batteries as a
EL
FI
FR
LT
MT
PL
on the
11