15 -Instructions For End-Of-Life Disposal; Treatment - Gaggia CONCETTO ER Mode D'emploi

English
To re-assemble the coffee grinder unit, do as follows:
Screw fully the adjustment ring nut (F), then unscrew it by 1/2
turn.
This 1/2 turn untightening of ring nut is necessary to
avoid grinders jamming and damage.
F
F. 21
Replace the gearwheel (E) and fix it tightening the screws (D).
Replace the coffee bean hopper (H).
Be careful to place the gasket properly (G). It has to
correctly engage with the gearwheel (E) and the ring nut
(F).
Fix the container (H) tightening the screws (B) with the appro-
priate tool (C).
B
E
G
F
F. 22
Open the bulkhead (AD).
F. 23
15 - INSTRUCTIONS FOR
This product complies with EU Directive 2002/96/EC.
C
The symbol
H indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collec-
tion point for the recycling of electrical and electronic equip-
ment.
By ensuring this product is disposed of correctly,you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inap-
propriate waste handling of this product. For more detailed in-
formation about recycling of this product, please contact your
local city office, your household waste disposal service or the
shop where you purchased the product.
49/124
Before re-operating the machine, a new grind adjustment
is required.
A
END-OF-LIFE DISPOSAL

TREATMENT

on the product or on its packaging
The diposal of the vending machine or of a part of it
must be carried out with full respect of the environment
and according to local laws in force.
CONCETTO ER CONCETTO ER CONCETTO ER
CONCETTO ER CONCETTO ER