Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Features
Top Panel
2
1
3
4
Keybed/Octave/Wheels
Note: Text accompanying keyboard controls indicates secondary functions that can be accessed by
pressing SHIFT while using the control.
1. Keybed: This velocity-sensitive keybed is the primary
method of sending Note On/Off MIDI data.
Chord Mode: Hold SHIFT and press keys C2–Bb3 to
edit Chord Mode settings.
2. OCTAVE +/-: Press these buttons to adjust the pitch
range of the keys up or down one octave.
TRANSPOSE: Hold SHIFT and press these buttons to
adjust the pitch range of the keys up or down one
semitone.
The keyboard can be raised up to four octaves or
lowered down to three octaves from its default octave
range and a total of twelve semitones from its default
transposition.
To reset Hammer 88 Pro to its default octave range and
transposition (C2–C7 on the keybed), press the Octave
- and Octave + Buttons simultaneously.
3. PITCH: Roll this wheel up and down from the center
position to bend the pitch of the keyboard while playing.
The default range of the pitch-bend will vary between software synths.
The wheel is spring mounted and will return to the center position when released.
4. MOD (Modulation): Move this wheel to send continuous controller data—MIDI CC #01
(modulation), by default.
5
7
8 9
11
10
12 13
25
24 26
17
18 19 20
14
15
6
21 22 23
16
29
27
28
5
Publicité
Table des Matières
