Extraction System And Electric Flap; Extractor Hoods For Mechanical Ventilation Systems; Motorless Extractor Hoods - Atag WS9111MRL Notice D'utilisation

EXTRACTION SYSTEM AND ELECTRIC FLAP

Extractor hoods for mechanical ventilation systems

1. CMV
2. Recirculation

Motorless extractor hoods

EN 6
With central mechanical ventilation systems, the normal extraction
rate is often not high enough in the kitchen. ATAG has developed and
patented its own unique system. This system fits all of the leading
systems for central mechanical ventilation (CMV).
The system is a combination of two separate extraction systems:
mechanical ventilation and recirculation. On the one hand, optimum use
is made of the existing central mechanical ventilation system, and on
the other hand, a recirculation system is used to increase the rate of the
air being extracted.
1
2
The extractor hoods are fitted with a washable long-life charcoal filter,
and are quieter and more energy-efficient than conventional extraction
hoods. Almost all odours and vapours are eliminated even during
extended periods of cooking. Thanks to the recirculation system, the air
does not all disappear outside. That is because some of the extracted
air is returned into the kitchen after filtering. This means you use less
energy.
ATAG also manufactures a complete range of motorless extractor
hoods, suitable for central mechanical ventilation systems with an
electrically operated flap for an hermetic seal. The electric flap opens
and closes within a few seconds. Once it is open or closed, the electric
motor is turned off which saves energy.
1
2