Software Installation; Technical Specifications - Velleman VCC6 Guide D'installation Rapide

7. Software installation

• At start up, Windows will open the Hardware Wizard. Just click Cancel.
• Insert the included CDROM into a suitable CD-ROM drive. When autorun is disabled, open
Windows explorer and browse to the CD-ROM. Locate AUTORUN.EXE and double click on it.
Install DVR
Install CMS
Browse CD
DVR manual
CMS manual
Exit
• For installing the DVR and/or CMS software, follow the instruction on the screen. Click on the
'Continue anyway' button when the 'Windows Logo Testing failed' message appears.
• Restart the computer.
• After reboot, first open the SuperDVR software and then connect the camera(s).
• Open the DVR and/or CMS user manual for instructions on how to use the software (English
only).

8. Technical specifications

input
video input
display rate
recording rate
compression format
PAL
video resolution
NTSC
recording media
record mode
network
I/O device
PTZ
remote software
22.07.2010
VCC6/VCC7
Install Digital Video Recorder (DVR) drivers and software
Install the Central Management Software (CMS)
Browse the CD-ROM
Open the Digital Video Recorder (DVR) user manual
Open the Central Management Software (CMS) user manual
Close the CD-ROM menu.
VCC6
25fps (PAL), 30fps (NTSC)
25fps (PAL), 30fps (NTSC)
4-channel input, 1-channel relay
output
protocol configurable, remote control capability
Internet Explorer browser and CMS software (incl.)
BNC
4 cameras
100fps (PAL), 120fps (NTSC)
100fps (PAL), 120fps (NTSC)
H.264
704 x 576, 352 x 288
640 x 480, 320 x 240
HDD, USB and DVD
motion, sensor, schedule, manual
TCP/IP
4-channel input, 2-channel output, 1-
5
VCC7
channel relay output
©Velleman nv