AFG Sport 2.5AT Manuel Du Propriétaire page 12

ASSEMBLY STEP 3
HARDWARE BAG 3 CONTENTS :
BOLT (A)
20 mm
Qty: 4
RUNNING DECK
BASE FRAME
12
SPRING WASHER (B) FLAT WASHER (C)
15 mm 15 mm
Qty: 4 Qty: 4
CONSOLE CABLE
LEAD WIRE
RIGHT CONSOLE MAST
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
CONSOLE CABLE
Open HARDWARE BAG 3.
A
Pull LEAD WIRE through RIGHT CONSOLE
B
MAST. After pulling the lead wire through the
mast, the top of the CONSOLE CABLE should
be located at the top of the mast. Detach and
discard the lead wire.
With the RUNNING DECK in the raised
C
position, attach the RIGHT CONSOLE
MAST to the BASE FRAME using 4 BOLTS
(A), 4 SPRING WASHERS (B) and 4 FLAT
WASHERS (C).
NOTE: Be careful not to pinch any wires
while assembling the right console mast.