Unpacking; Electrical & Motor Specifications - Brutus 61024 Manuel D'utilisation

UNPACKING

Open carton from the top.
Top tray contents:
• Front Extension Tray
• 10 in. Diamond Blade
• Upper Frame Wheels
• Water Pump
• Rip Guide
• Cord Collecting Hanger / Tool Caddy with 2 blade wrenches and 6 mm Allen Key
• Bag of miscellaneous hardware (includes drain plug, wheel hardware (2), motor frame mounting screws (3),
hardware for mounting tool caddy (2), motor frame locking knob)
• User's Manual
Middle Tray:
• Stand
Bottom Tray:
• Motor Head Assembly
• Saw Frame with Table
• Rear Water Collection Tray
61024 TILE SAW FEATURES
• Removable rear Collection Water Tray
• Adjustable cutting head allows plunge cuts and for 22.5° and 45° bevel cuts
• 10 in. diamond blade cuts tile up to 2-3/8 in. thick
• Maximum rip cut length up to 24 in. tile. Diagonal Cut, up to 18 in. tile
• Folded Saw Stand with wheels offers quick set up, as well as easy mobility
ELECTRICAL AND MOTOR SPECIFICATIONS
MOTOR SPECIFICATIONS
Amps
Volts
Hertz
RPM
INTRODUCTION
We at Q.E.P. would like to congratulate you on selecting the 61024 Tile Saw. We are certain that you will be pleased with your
purchase. QEP is the world's largest supplier of flooring installation tools and accessories, and we takes pride in producing
the finest tile saws in the industry.
This owner's manual contains information necessary to operate and maintain your 61024 safely and correctly. Please take a
few minutes to familiarize yourself with all the contents of this manual. Should you have questions, feel free to call our
Customer Service department, toll free at: 800-777-8665. Please do not contact the retailer.
Thank you,
QEP
9.5
120V
60Hz
n 3450 RPM
0
- 7 -