Accessories; Freezer Box; Roller Storage Box - Sharp SJ-B1297E0I-EU Guide D'utilisation

Masquer les pouces Voir aussi pour SJ-B1297E0I-EU:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
CHAPTER -3: USING YOUR FRIDGE FREEZER
Store food in the coldest area of the refrigerator.
Your foods will be better stored if you put them in the most appropriate
cooling area. The coldest area is just above the crisper.
The following symbol indicates the coldest area of your refrigerator.
To be sure to have a low temperature in this area, make sure the shelf is
located at the level of this symbol, as shown in the illustration.
The upper limit of the coldest area is indicated by the lower side of the sticker (head of
the arrow). The coldest area upper shelf must be at the same level with the arrow head.
The coldest area is below this level.
As these shelves are removable, make sure they are always at the same level with
these zone limits described on the stickers, in order to guarantee temperatures in this
area.

Accessories

Ice box
• To remove the ice box; pull the upper freezer box out as far as possible and then pull
the ice box out.
• Fill 3/4 full of water and place the ice box in it freezer.
Note: While placing the ice box in the freezer, place it in a horizontal position. Otherwise the
water in the ice box can spill.

Freezer box

• The freezer box is for foods that need to be accessed more easily.
• Removing The freezer box;
• Pull the box out as far as possible
• Pull the front of box up and out.
! Make the inverse of the same operation for the resetting the sliding
compartment.
Note: Always hold the handle of box while moving in or out.

Roller storage box

You can use this compartment for three different functions.
Note: Your fridge is delivered to you with the shown section in
the open position. The declared energy consumption and volume
are according to this setting.
1. To use for 0 °C Department: If you want to use this
compartment as 0 °C box you must take the sliding part
(cover, which is indicated in picture) from closed position to
open position.
2. To use for Crisper Department: If you want to use this
compartment as crisper, you must take the sliding part (cover,
which is indicated in picture) from open position to closed
position.
• While this compartment is used as an 0 °C compartment, food retains freshness and for longer.
• Pull the chiller shelf out toward you. The cover will open automatically.
Please note this this is not a freezer compartment.
Picture-1
Removing The chiller shelf;
• Open the cover fully. (Picture-1)
• Pull the chiller shelf out towards you. (Picture-2)
• Pull the wheels of chiller shelf up from the rail in order to remove it. (Picture-3)
Visual and text descriptions on the accessories section may vary according which model you have..
Picture-2
EN -10-
sliding part
Picture-3

Publicité

Table des Matières
loading

Table des Matières